How do I start AutoCAD 2025? (100% Full Guidance) March 2025

Guys, today we are learning about how to start AutoCAD. Is AutoCAD easy to learn? How can I use AutoCAD on my laptop, also, can I teach myself AutoCAD?

Do you know how to start AutoCAD?

To begin AutoCAD:

1. From the very outset menu (Microsoft Windows) pick Programs. Then, at that point, pick AutoCAD 2023 from the menu.

2. At the point when it begins, you will get an exchange box.

3. At the point when you start AutoCAD, the Startup dialog box is shown. The exchange box furnishes you with four different ways to begin a drawing.

• You can open a current drawing
• Begin a drawing without any preparation
• Begin a drawing in light of a layout
• Use wizards to assist you with setting up your drawing

4. The Startup exchange box is shown when you initially start AutoCAD. At the point when you start another drawing during your AutoCAD meeting, the Create New Drawing exchange box is shown.

5. After you use AutoCAD for some time, you might need to switch off the show of these discourse boxes. Assuming that you switch them off, pick File

6. New naturally makes another drawing in light of your last Start from Scratch choice (English or metric).

7. Picking File Open shows the Select File exchange box, where you can choose AutoCAD drawings, what’s more, layouts.

8. On the off chance that you turn this exchange box off, you can betray by doing the accompanying: Go to the Tools menu pull-down and select Options. In the Options window, click on the System tab.

9. Under General choices, click on actually, look at the box close to Show Startup Dialog.

In the Startup discourse box, pick one of the following:

Open a Drawing:

Opens a drawing you select from a rundown of the four most recently opened drawings. Likewise, shows the Browse button if you decide to search for another document

Begin from Scratch:

This opens another drawing given the estimation framework you pick in English
(inches) or metric (millimeters).

Utilize a Template:

Opens another drawing given a format you select from a rundown.

The rundown shows layout documents (.dwt augmentation) that exist in the drawing format record area as determined in the Options discourse box (see OPTIONS).

Likewise, shows the Browse button if you decide to search for another record.

Layout documents store every one of the settings for a drawing and can likewise incorporate predefined layers, aspect styles, furthermore, views.

Utilize a Wizard:

Opens another drawing that you set up utilizing either the Quick Setup wizard or the High-level Setup wizard.

AutoCAD arrangement wizards start with similar settings utilized when you start a drawing without any preparation, or at least,

English or metric, then modify different settings depending upon the wizard you pick.

The Quick Setup wizard sets the drawing units and drawing region. Decisions for drawing units incorporate Decimal, Engineering, Architectural, Fractional, and Scientific.

You likewise determine the width and length of the attracting region to lay out the drawing limit or cutoff points.

The region inside the cutoff points is the last plotted sheet size.

With the Advanced Setup wizard, you can indicate similar settings as the Quick Setup wizard (drawing units and drawing region), and you can indicate a few point settings.

Including the point of estimation, the bearing of the zero point, and the course wherein AutoCAD estimates points from the zero point.

Read More: Introduction to AutoCAD. and How to use the AutoCAD command line.

FAQ on How do I start AutoCAD

You can read our Other Articles